73
G-B roller sublimator
2019/12/6
Product performance:
Special precision winding technology is adopted to effectively maintain uniform and stable temperature.
Temperature and time are electronically controlled; The signal indication is convenient to use.
The surface of the heating plate can withstand high temperature, with smooth surface and high strength; Good hot pressing effect, easy to clean.
The screw pressure design can adjust the required working pressure at will. High temperature resistant silicone rubber plate will be set on the surface of the base plate to make heat transfer products better.
Operating procedures
Please note that the user should use the grounding wire to operate the machine, and pay attention to safety!
1. Check the voltage before use. Turn on the power!
2. Insert, turn on the power switch of the machine, and the power indicator will light up.
3. Set the thermostat to the desired temperature （usually 120-200 ℃） and the timer to the desired temperature （usually 5-20 seconds）。
4. Place the clothes on the motherboard and cover the printing paper （pay attention to the correct surface of the paper）。 Press the handle until the terminal is reached.
When the time is up, the buzzer alarms and the handle is pulled back.
6. If the transfer paper is cold cut, please use the blackboard eraser to wipe the entire transfer paper, wait for 5-10 seconds, and then tear off the transfer paper. If it is hot cut paper of transfer paper, you can tear it off immediately after printing.
Sixian Kehan Technology Co., Ltd Copyright {Disclaimer}